Topics List Inbox Friends Search Admin Information  
 You are not logged in.   
Username: Password: Register

Guitars
 This Topic was created by [maiden/priest6666] Messages per page: 20 50 [100]
Message display order: [Newest first] Oldest first 
Go to Parent Topic
 


talk bout guitars






You do not have enough Respect Points to post in this topic.


[Vaillant 3.0] Saturday, October 24, 2009 8:18:32 PM 
Very nice, Joe!! Forty seconds onward the song sounds especially heavy. Keep it up, man!!!
  [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Saturday, October 24, 2009 6:30:03 PM)
[Becks] Saturday, October 24, 2009 6:39:01 PM 
I think you've done great Joe very nice guitar playing.
  [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Saturday, October 24, 2009 6:30:03 PM)
[Bazookajoe_666] Saturday, October 24, 2009 6:30:03 PM 
Hey everyone, here's just a crappy little video of me playing some riffs I wrote a little while ago.

http://www.youtube.com/watch?v=AEXH3mevemo

Tell me what you think. I can handle it haha.
[SDBinNY] Tuesday, October 20, 2009 8:01:58 PM 
Jazz in the neck position is stock, so you'd have to swap that out, and that would add another $75 to the extra grand you are paying for binding, an OFR, and ebony.
  [Show/Hide Quoted Message] (Quoting Message by K2M from Tuesday, October 20, 2009 3:42:12 PM)
[K2M] Tuesday, October 20, 2009 3:42:12 PM 
The Ebony fret board. No Jazz pickups for me. Original Floyd.
[SDBinNY] Monday, October 19, 2009 7:05:47 PM 
The KE5 and KE3 are alder bodied as well, and all three models also come with the Duncan JB and Jazz pickups.
  [Show/Hide Quoted Message] (Quoting Message by K2M from Monday, October 19, 2009 1:01:39 PM)
[SDBinNY] Monday, October 19, 2009 6:59:50 PM 
GD~ Give these videos a peek when you get the chance...

http://www.mikelull.com/Test_web/Repair_Shop/plek.htm
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Monday, October 19, 2009 4:10:04 PM)
[guitardude] Monday, October 19, 2009 4:10:04 PM 
Once I find a reputable luthier, I will inquire of this process. Can`t say I`m familiar with it. PLEK, accronym for something? I guess my lack of knowledge on this one is from using an old school guy for so long, he did everything the hard way, micrometer and crown files!!! But damn he did good work !!
  [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Monday, October 19, 2009 11:27:46 AM)
[K2M] Monday, October 19, 2009 1:01:39 PM 
Kelley No. 2 
THe Alder
The neck thru  body
THe ebony fret board
the Pickups
The Floyd   [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Sunday, October 18, 2009 11:28:24 PM)
Edited at: Monday, October 19, 2009 1:02:14 PM
[SDBinNY] Monday, October 19, 2009 11:27:46 AM 
If at all possible, look into the PLEK process. It evalutates the fret condition with a laser under string tension and is rumored to be absolutely phenomenal.
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Sunday, October 18, 2009 4:33:59 PM)
[SDBinNY] Monday, October 19, 2009 11:24:49 AM 
The only difference in construction of the KE2 and KE5 is the binding and fingerboard wood, so that is just a matter of preference. Personally I have really been more into bolt ons lately, so I would go for the KE3 myself. If buget was no issue or someone was giving it to me, I would gladly accept a KE2, though. The JS30KE does absolutely nothing for me, a Kelly  should never have dot inlays...   [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Sunday, October 18, 2009 11:28:24 PM)
Edited at: Monday, October 19, 2009 11:26:01 AM
[guidogodoy] Sunday, October 18, 2009 11:37:22 PM 
Really out of my realm but I like #4. Simple but with the Floyd Rose.

My vote.
  [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Sunday, October 18, 2009 11:28:24 PM)
[Bazookajoe_666] Sunday, October 18, 2009 11:28:24 PM 
What would you guys say is the BEST Kelly on this page?

http://www.jacksonguitars.com/products/products.php?group=Kelly-Body

I'm swaying more towards the USA one. Anyone care to put more info in? I'm just curious. Not buying.
[guitardude] Sunday, October 18, 2009 4:33:59 PM 
Yea, I kind of figured that is what I would have to do. Looking into a place in Ohio that another member has used. I have seen their work in person and it`s remarkable.   [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Sunday, October 18, 2009 6:43:43 AM)
Edited at: Sunday, October 18, 2009 4:34:32 PM
[SDBinNY] Sunday, October 18, 2009 6:43:43 AM 
It may be time for a pro set up. Might need a truss rod adjustment and a fret level and polish by now, so I would consider having it done....
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Saturday, October 17, 2009 6:49:46 PM)
[guitardude] Saturday, October 17, 2009 6:49:46 PM 
Open question here. I have been adjusting my Jackson for lower action and have the strings at 2.5mm between the 12th and 13th frets. With the Jumbo frets that Jackson uses this puts them right on the deck with just a hint of buzz. This still seems high to me and is driving me crazy. I`m thinking that with the height of these frets, maybe I should just get used to it. OR... should I look into a fret leveling job and bring them down a bit??? been checking prices and wow is that pricey. The local shop that has done lot`s of work in the past for me, the owner retired and closed up. So now this has forced me to look elsewhere.
So should I just get used to it? Or look into getting the work done?
[SDBinNY] Saturday, October 17, 2009 5:54:49 PM 
I have never had the chance to play a Hamer, but have been looking for an explorer with a Floyd, and am keeping an eye out for one because they are one of the few that produce one.
[guidogodoy] Saturday, October 17, 2009 3:03:33 AM 
Yeah, me too. Heh.....
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Friday, October 16, 2009 7:37:10 PM)
[guitardude] Friday, October 16, 2009 7:37:10 PM 

Whew hew!! I knew that would fire up the debates!!!!
The GT model with it`s "SG" neck is amazing and the slickest application for a hybrid blend I`ve ever laid my hands on. Damn I wished I knew someone that was selling one of those!!!!!

[Vaillant 3.0] Friday, October 16, 2009 10:09:56 AM 
Speaking of Glenn...here's one pic of him for the road.


Edited at: Friday, October 16, 2009 10:20:40 AM
[Vaillant 3.0] Friday, October 16, 2009 10:03:11 AM 
Actually, Glenn's first name being misspelled isn't new.


  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Friday, October 16, 2009 8:22:14 AM)
[guidogodoy] Friday, October 16, 2009 8:22:14 AM 
Oops. MY misspelling. I meant "not a standard A6" nor the Hamer GT. Wasn't trying to argue "standard issue" A7 by any means. Only that it is NOT the Phantom GT Glenn (notice he spelled it wrong in the eBay ad?) plays in Freewheel.

As you know, I am looking right AT the one he does play!
  [Show/Hide Quoted Message] (Quoting Message by Phantom A6 from Thursday, October 15, 2009 11:19:37 PM)
[Phantom A6] Thursday, October 15, 2009 11:35:55 PM 
Sorry, there's a misspelling (A7)!!
Not "& control knobs"!! "6 control knob"

I think he want to make it more interesting for the buyers!!
It's the third A7 on ebay I know. Want to have one!! Dammit!!

  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Thursday, October 15, 2009 11:22:40 PM)
[Vaillant 3.0] Thursday, October 15, 2009 11:22:40 PM 
Thanks for all the info, Phantom!!

Although it still doesn't make up for the fact that the seller is lying (or maybe naive...you never know) about which Phantom model Glenn was using in the Freewheel Burning video.
  [Show/Hide Quoted Message] (Quoting Message by Phantom A6 from Thursday, October 15, 2009 11:13:46 PM)
[Phantom A6] Thursday, October 15, 2009 11:19:37 PM 
There are three versions of the A7.
The first version without the synth PickUp n a 3-over-3 headstock.
the second version without the synth PickUp n a 6-in-line headstock
and
the third version with the synth PickUp n the 6-in-line headstock.

  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Thursday, October 15, 2009 11:02:07 PM)
[Phantom A6] Thursday, October 15, 2009 11:13:46 PM 
Yep , it's a Hamer Phantom A7.
Four PickUps!! One single coil, one Triblebucker, but you can split the
Triblebucker in one Humbucker n one single coil. And theres the Roland Guitar synth PickUp. One 5-way PickUp selector n & control knobs.
You can find a lot of pics in my albums on my MySpace page.

In the "Freewheel burning" vid Glenn's playing a Hamer Phantom A6!!
One Hamer "Slammer" Humbucker n one volume knob!!

His Hamer Phantom GT is a special A6 version. With a "SG" neck,
two EMG 81 active humbuckers, one volume knog n one 2-way
PickUp selector. Glenn n K.K. prefer the 2-way PickUp selectors!!

  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Thursday, October 15, 2009 9:52:30 PM)
[Vaillant 3.0] Thursday, October 15, 2009 11:13:14 PM 
Well then, let's leave it at that. The guy doesn't know how to count buttons (er, rather, volume knobs) and pick-ups.   [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Thursday, October 15, 2009 11:02:07 PM)
Edited at: Thursday, October 15, 2009 11:14:44 PM
[guidogodoy] Thursday, October 15, 2009 11:02:07 PM 
That is STILL not a standard issue A7 Hamer. "White lie" aside. He is full of BS. Even on the Turbo album.
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Thursday, October 15, 2009 10:53:14 PM)
[Vaillant 3.0] Thursday, October 15, 2009 10:53:14 PM 
Yup. I saw the little white lie he made in the description. HOWEVER!! There's no denying that Glenn did play a Hamer Phantom A7 model at one point in his career. With Roland Synths and everything, although more or less customized differently compared to the one the seller has. Had the guy said that Glenn played this model during the Turbo tour, then he would be more precise, although it still wouldn't get him too many bidders since the Turbo album isn't the most popular of Judas Priest's albums. Plus, the Phantom he's selling is in used condition, which may also be the reason why he's selling it at a low price...and you know how rare those Hamer Phantoms are in the market today.


  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Thursday, October 15, 2009 9:52:30 PM)
[guidogodoy] Thursday, October 15, 2009 9:52:30 PM 
I saw it. Guy doesn't know what he is talking about. It is NOT the guitar Glenn plays in the vid or in real life as any picture would show. That is an A7. Glenn played his trademark Hamer PhantomGT. Look at the number of pickups. Three on that one for sale...two on Glenn's. Same goes for the knobs. Three on the A7, one on the GT. Even IN the video.

THAT is why his price is going so low....most know better. Freewheel Burnin' screen capture:


  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Wednesday, October 14, 2009 10:17:12 PM)
Edited at: Thursday, October 15, 2009 9:57:11 PM
[Vaillant 3.0] Wednesday, October 14, 2009 10:17:12 PM 
Update from ebay, guitarists of the Noticeboard!!

cgi.ebay.com/1985-Hamer-Phantom-A7-Guitar-Roland-Synth-Judas-Priest_W0QQitemZ170392658047QQcmdZViewItemQQptZGuitar
[hellrider 31038] Monday, October 12, 2009 12:45:40 AM 
lol.glad you enjoyed it.lol
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Sunday, October 11, 2009 2:40:01 PM)
[Vaillant 3.0] Sunday, October 11, 2009 11:25:46 PM 
Yes, Sir!! Thanks again!!!
  [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Sunday, October 11, 2009 5:32:29 PM)
[hellrider 31038] Sunday, October 11, 2009 7:38:25 PM 
HELL YEAH vaillant awesome axe my good friend even a shot of you in action HELL YEAH oh and by the way awesome shirt
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Sunday, October 11, 2009 3:37:55 PM)
[SDBinNY] Sunday, October 11, 2009 5:32:29 PM 
Although you should really set the guitar where it is most comfortable for you, the most common starting point is about where it is when you play sitting. I personally have never liked the can pick your teeth with the trem arm height thing, but I will say it does vary by body style. The radical shapes hang lower than the more traditional for me.

Keep an eye on those strap buttons for a week or two, you never know what may happen over the long run, then check it once a month or so.. Gravity is a bitch, so show it a little respect in this matter....
[Vaillant 3.0] Sunday, October 11, 2009 3:37:55 PM 
Hey, SBD. Sorry it took a while. I placed the strap buttons last night and tested them today. I used that one method of putting in toothpicks, since it's budget-friendly (heheh). Except that instead of putting in toothpicks, I used Q-tips . The Q- tip sticks were made of wood, and were slightly thicker in diameter than a toothpick.

I cut off the cotton heads with scissors, and cut the remaining stick to the match the height of the strap hole. I put two pieces in each hole, then screwed in the nails and buttons with a screwdriver. Then I put on the guitar strap, but didn't test it then because it was late. This morning I put the guitar strap (with guitar) around me and let it hang from my shoulders for a bit to see if the buttons will hold, then proceeded to play a couple of pieces of JP tunes (and even got dressed for the occasion!). The result:
SUCCESS!!! Thanks again for the advice, gents!!!!

Before (the day I got it from my nephew this Jan.):



...and after!! You can see the small, silver strap button...the strap itself is black.



Now...my next question: Is there a proper way to stand while playing? How about the position of the guitar as you play it while standing?   [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Sunday, October 11, 2009 8:54:43 AM)
Edited at: Sunday, October 11, 2009 3:40:17 PM
[guitardude] Sunday, October 11, 2009 2:40:01 PM 
Looks like the neighborhood of every kid from the eighties when they first got their guitars and amps!!! Good one
  [Show/Hide Quoted Message] (Quoting Message by hellrider 31038 from Sunday, October 11, 2009 12:38:12 PM)
[hellrider 31038] Sunday, October 11, 2009 12:38:12 PM 

lol 


Edited at: Sunday, October 11, 2009 12:44:52 PM
[SDBinNY] Sunday, October 11, 2009 8:54:43 AM 
Any luck Vail?
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Thursday, October 01, 2009 9:34:15 PM)
[K2M] Tuesday, October 06, 2009 2:11:49 PM 
Ok Valiant.
YOuve got the intro good. that goes with verse one.
Now play an A chord after the last trill riff of the verse. then
string 3 2nd fret
string 3 open
string 4 2nd fret
string 3 open
string 3 2nd fret.
do you here it. that is one for road (chorus)
then sharing our XXXX
ends on string 4 2nd fret.
show us the way
string 3 4th fret pull off to the 2nd fret and hammer on
then 2 string fret3 then fret 4.
[hellrider 31038] Saturday, October 03, 2009 10:44:42 PM 
i have some more advice



FUUUCCC????EEEENNNNNN    CRRRRRAAAAANNNNKKKKKK       ITTTTTTTTTT..lol
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, October 03, 2009 2:22:55 AM)
[Becks] Saturday, October 03, 2009 2:34:25 AM 
That's awesome Vail!!!
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, October 03, 2009 2:22:55 AM)
[Vaillant 3.0] Saturday, October 03, 2009 2:22:55 AM 
Awesome advice, gents!! Thanks!! Hopefully I'll be fully mobile in my playing soon enough.

K2M, I have the opening to "One for the Road" figured out. Been practicing it for a while now. All that's needed is to figure out the rest of the song.
[K2M] Friday, October 02, 2009 4:38:04 PM 
Val Keep on playin it.
Did you figure out "one for the road". It is in the open postion.
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Thursday, October 01, 2009 9:34:15 PM)
[guitardude] Friday, October 02, 2009 1:55:25 PM 
SDB is right on the money with the toothpicks or dowel idea. I suggest using some stuff called "Gorilla Glue" to do te gluing with. It is an expanding type of  glue but what ever oozes out of the hole is easily trimmed with a razor.Just be careful with the Gorilla Glue, it loves to get onto your skin. It poses no problem just an annoyance.
  [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Friday, October 02, 2009 11:17:26 AM)
[SDBinNY] Friday, October 02, 2009 11:17:26 AM 
That depends on how much material is missing. If the original ones just pulled out, I have heard of people gluing tooth picks in the holes around the outside edge, then installing the new strap buttons, but I have my doubts as to the long term viability.

I would suggest you find a craft or hardware store and pick up a piece of dowel rod slightly larger than the diameter of the hole. Drill out the stripped holes to the same size as the dowel (don't go any deeper than the current hole), then glue the dowels in place. Let the glue dry for 24 hours, then redrill the size hole needed for the new strap buttons.
[Vaillant 3.0] Thursday, October 01, 2009 9:34:15 PM 
Good evening, guitarists of the Noticeboard. I seek your advice on something. It may be a bit trivial, but bear with me.

My guitar is a Squier, and I love it to death and play it as much as I can. I've been meaning to put on a guitar strap, since my older nephew (the previous owner of said guitar) took it off. I went to the music shop nearby a few days ago and bought the screws and bolts and everything. The problem is that the holes where the screws are supposed to go are too big. It kinda looks as though he pulled them off, or that something's missing. What should I do? Should I partially cover those holes with glue or something and then put in the screws, or what? Any advice is appreciated.
[guitardude] Saturday, August 22, 2009 8:03:09 AM 
 [Show/Hide Quoted Message] (Quoting Message by ~ MG_Metalgoddess~ from Thursday, August 20, 2009 5:39:22 PM)
Edited at: Saturday, August 22, 2009 8:04:15 AM
[guitardude] Saturday, August 22, 2009 8:02:45 AM 
Thanks MG, while I have seen most of those, some were new and as always with George, they are great!
  [Show/Hide Quoted Message] (Quoting Message by ~ MG_Metalgoddess~ from Thursday, August 20, 2009 5:39:22 PM)
[~ MG_Metalgoddess~] Thursday, August 20, 2009 5:39:22 PM 
BOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!  here Ill post this for the guys.,...  


See ya!!!  MG~

George%20Lynch
Quantcast
[SDBinNY] Wednesday, August 19, 2009 5:27:54 PM 
I know, it is difficult to believe that over 25 years later, Randy still garners such a reverence from so many. In that trailer, I think John 5 said it best.

The guy who posted it has posted it elsewhere, but it gets removed almost immediately. Every time he posts it, they threaten to pull the plug on the whole project, but it at least results in a release date delay. Simple fact of the matter is that Peter needs to understand that Randy belongs to all of us now, and it is a posession held in the highest of regards. As soon as I know any further, I will post it...
[guitardude] Tuesday, August 18, 2009 2:37:16 PM 
WOW!  If the trailer is that moving, I cannot wait to see this thing!!! When and where?
  [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Tuesday, August 18, 2009 2:01:45 PM)
[SDBinNY] Tuesday, August 18, 2009 2:01:45 PM 
Before it is removed again, the Randy Rhoads movie trailer is up....

www.dailymotion.com/video/x9yzz5_randy-rhoads-documentary-trailer_music
[Coyote Bongwater] Wednesday, August 12, 2009 11:27:46 PM 
once i get my casr i'm goin for an accustic immediately after!!!!!!
[Bev] Thursday, July 30, 2009 8:18:13 AM 
LOL ... no kidding!  Next time it is ; )  Sending the same to our little MetalBud ... my best to you & yours.  Really glad to have had the chance to hook up with you!  A great time!!!
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Wednesday, July 29, 2009 8:38:53 PM)
[guitardude] Wednesday, July 29, 2009 8:38:53 PM 
Ooops! What a miss that was! No sweat, maybe next go round!!!  Give Cuda a big high five for me!
  [Show/Hide Quoted Message] (Quoting Message by Bev from Tuesday, July 28, 2009 5:35:19 AM)
[Bev] Tuesday, July 28, 2009 5:35:19 AM 
GD ... check your email!  Funny story ... well, kind of!
[guitardude] Sunday, July 19, 2009 6:23:25 PM 
That particular guitar is custom all the way. I forget the builders name (JD Higgins or Riggins  ?)but it is a very cool guitar. And those inlays look great. I can see his cabinets thru the stairs, always wondered where he had them? many players these days use an isolation booth or face them away from the stage and rely strickly  on their monitors to hear what they are playing. very cool indeed!
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Sunday, July 19, 2009 1:10:26 PM)
[Vaillant 3.0] Sunday, July 19, 2009 1:10:26 PM 
Glenn also brought out his SG for this tour!! Along with the Phantoms, I also like his custom angular guitars.

You know, he also used those JP cross inlays at one time. Maybe they also fell off...


  [Show/Hide Quoted Message] (Quoting Message by guitardude from Sunday, July 19, 2009 1:00:47 PM)
[guitardude] Sunday, July 19, 2009 1:03:27 PM 
Yea, I knew the KxK `s are inlays, was just thinking of having that caliber of guitar with those stick on position markers, yukk!
Now if someone could actually make those as an inlay, I would seriously consider them.
  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Saturday, July 18, 2009 9:31:57 PM)
[guitardude] Sunday, July 19, 2009 1:00:47 PM 
I have noticed that Glenn has brought his black Strat back out for the BS tour!! I so love that guitar  right along with his Phantoms!!
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, July 18, 2009 9:36:43 PM)
[guitardude] Sunday, July 19, 2009 12:58:02 PM 
MS
Thanx ! That is an old  and rare pic. Besides the SG`s , Ian is at the front of the stage. That`s something I`ve never seen , until they are bowing at the show`s end!!  Very cool pic!  I have  the Metalogy vid that KK is playing an SG.                                                                                                                                                                                                                           [Show/Hide Quoted Message] (Quoting Message by Maple Syrup from Saturday, July 18, 2009 9:31:30 PM)
Edited at: Sunday, July 19, 2009 1:06:09 PM
[guidogodoy] Saturday, July 18, 2009 9:42:36 PM 
You know me, though (as does everyone else who got the album). I am a Hamer kinda guy!
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, July 18, 2009 9:36:43 PM)
[Vaillant 3.0] Saturday, July 18, 2009 9:36:43 PM 
The red one is the next best thing to the Gibson Flying V. KK hasn't brought out any of the guitars he used in the BS era for this tour, unfortunately.  
  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Saturday, July 18, 2009 9:31:08 PM)
[guidogodoy] Saturday, July 18, 2009 9:31:57 PM 
The original KxK's are inlays.
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Saturday, July 18, 2009 9:27:12 PM)
[Maple Syrup] Saturday, July 18, 2009 9:31:30 PM 
Guitardude: This ones for you! Both KK & Glenn are playing SG's. Pretty freaking rare bro. 1977.. MpleSyrp
[guidogodoy] Saturday, July 18, 2009 9:31:08 PM 
Yeah, we did but now I've SEEN all three up close and personal-like! LOL!!

The red one is all full of sparkles. Don't know if I can handle the bling. Plus, I already have two red ones. Does that offset the three black ones though? Hmmm.....
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, July 18, 2009 8:11:50 PM)
[guitardude] Saturday, July 18, 2009 9:27:12 PM 
I`ll go for the Red one again, but not with any vinyl decals between the frets. Great idea, wrong appilcation.
  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Saturday, July 18, 2009 12:08:57 PM)
[Vaillant 3.0] Saturday, July 18, 2009 8:11:50 PM 
Wait a minute! I thought we already voted!! Hmmmm...ah well, I'll still go for the red one.
  [Show/Hide Quoted Message] (Quoting Message by guidogodoy from Saturday, July 18, 2009 12:08:57 PM)
[guidogodoy] Saturday, July 18, 2009 12:08:57 PM 
Yeah, I saw those. Can't say that I particularly liked them. Nice thought but vinyl? They would peel off in half a second.

Now then. KK's new KxKs is another question. Red, black or white? Votes please! HAAAA!!!!!
  [Show/Hide Quoted Message] (Quoting Message by Vaillant 3.0 from Saturday, July 18, 2009 12:19:37 AM)
[Vaillant 3.0] Saturday, July 18, 2009 12:19:37 AM 
Check this out, guitarists of the Noticeboard!!

cgi.ebay.com/JUDAS-PRIEST-CROSS-Guitar-Bass-VINYL-DECAL-INLAY-SET_W0QQitemZ110407790122QQcmdZViewItemQQptZGuitar_Accessories
[Jeanine] Saturday, July 11, 2009 1:41:58 PM 
Please be so kind to vote for the best guitar duo in history: 
http://music.msn.com/superfans/heavy-metal/blog/weekend-poll-best-dual-guitar-team-in-metal/
[guitardude] Saturday, July 11, 2009 11:09:30 AM 
Anything George does is amazing! So very creative.
  [Show/Hide Quoted Message] (Quoting Message by ~ MG_Metalgoddess~ from Friday, July 10, 2009 9:11:54 PM)
[~ MG_Metalgoddess~] Friday, July 10, 2009 9:11:54 PM 
For Timbo & K2M...
[~ MG_Metalgoddess~] Friday, June 26, 2009 5:29:32 PM 
Georgey Porgey posted this today.,,, LOL  So I thought I would share since some of you like him... speaking of 
which  where the HELL has Timbo been!!! George Lynch Building his own Guitars
[guitardude] Tuesday, June 23, 2009 1:59:08 PM 
Another creative way to incorporate "Skulls and Snakes" together, cool guitar.
  [Show/Hide Quoted Message] (Quoting Message by ~ MG_Metalgoddess~ from Tuesday, June 23, 2009 9:41:47 AM)
[~ MG_Metalgoddess~] Tuesday, June 23, 2009 9:41:47 AM 
Okay now you can see the skulls better..  its different.. I havent decided if I like it or not!!!   LOL
[~ MG_Metalgoddess~] Tuesday, June 23, 2009 9:40:08 AM 
Have you guys seen Georges latest guitar????  LOL
There a re tiny little metal skulls at the bottom... Let me see if he has a better pic of the body of it.. brb
[~ MG_Metalgoddess~] Wednesday, June 10, 2009 9:14:32 PM 
George Lynch Guitar Clinic
&
Autograph Session

THURS. JUNE 18TH
@ 5PM

J&R MUSIC WORLD
23 PARK ROW
NEW YORK, NY
ESP Guitars NAMM 2009!
[K2M] Wednesday, June 10, 2009 6:24:12 PM 
Good Deal.  
[guidogodoy] Tuesday, June 09, 2009 5:38:14 PM 
Damnit, I want in on that class too! I know FOUR whole chords!!!
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Tuesday, June 09, 2009 3:33:32 PM)
[guitardude] Tuesday, June 09, 2009 3:33:32 PM 
Thisn is one of those "make your dad proud" kind of things!! Yesterday while coming home with my boys, I played "Mr.Scary", we got home before the song was over and my 10 year old tells me to wait until it`s over to turn off the car.
After the songs conclusion, he then proceeds to tell me that he wants to learn the song!!!!!
I was shocked , he worlds away from being able to play anything more than three basic chords, right now, but dammit, I`m going to teach him, right after I learn it!!
I am as proud as I can be of him, now if he`ll just keep the drive going!!!!!!
[Necroticist] Monday, May 25, 2009 6:15:14 AM 
Dammit! Am never gonna get the harmonics right on the 'Hot Rockin'  solo....'scuse me while i sulk a bit....
[guitardude] Saturday, May 23, 2009 10:25:11 AM 

Check out the new EMG-X series.
www.emgpickups.com 
  An active pickup , designed for the Passive user!!!

[~ MG_Metalgoddess~] Thursday, May 21, 2009 8:03:40 PM 
Yeah I thought it looked cool... So I posted here for the Guys..  I have no idea who owns it or where it came from..lol
  [Show/Hide Quoted Message] (Quoting Message by LadyBathory9 from Thursday, May 21, 2009 8:01:19 PM)
[CountessErzebethBathory9] Thursday, May 21, 2009 8:01:19 PM 
WOW! How can you not LOVE that GUITAR!!

  [Show/Hide Quoted Message] (Quoting Message by ~ MG_Metalgoddess~ from Thursday, May 21, 2009 7:59:02 PM)
[~ MG_Metalgoddess~] Thursday, May 21, 2009 7:59:02 PM 
[guitardude] Sunday, May 17, 2009 9:10:26 AM 
OK, thru multiple e-mails with EMG and multiple attempts at re- eq`ing my seetings, an actual eq (graphic or parametric) inline or a treble booster is what it will take to boost the top end of these EMG`s. Even their other models (model 60) that claim to be bright, probably will not be enough. Perhaps it`s time to go back to Seymour Duncan`s!!!
While the signal strength of the EMG`s is amazing, they are just so much darker than I am accustomed to!!
[~ MG_Metalgoddess~] Monday, May 11, 2009 1:38:27 PM 

LOL I changed my User ID.... FROM MG_medalgoddess   Just an FYI

Thanks PG/ MG~   to many  with the same/simuliar name..

[guitardude] Saturday, May 09, 2009 5:56:31 PM 
The seting for the compressor I used wasfor my Line 6 Pocket POD on a patch I wrote myself using their online editing , I put the compressor at a 14:1 setting .
  [Show/Hide Quoted Message] (Quoting Message by SDBinNY from Saturday, May 09, 2009 2:50:17 PM)
[SDBinNY] Saturday, May 09, 2009 2:50:17 PM 
I don't know what it is, but drenching chorus seems to be what really wakes up the EMG's. I have never tried a compressor, but may have to consider one on G~ Dude's recommendation...
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Saturday, May 09, 2009 11:25:41 AM)
[guitardude] Saturday, May 09, 2009 11:25:41 AM 
OK, at SDB`s recomendation, I made adjustments to the height of my EMG`s, now I can hear the difference between the bridge and neck pickups. Plus the guitar was tuned to a 440, I dropped it a half step.  Compression and chorus seem to be what the EMG`s like for that all out blitzing metal tone.
[K2M] Thursday, May 07, 2009 5:18:26 PM 
Agree. The best i have ever owned. I have the SH-H2.   Seymour Duncans. standard.  The EMG 81 is a Hot pickup.( gain Boost).
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Thursday, May 07, 2009 1:50:18 PM)
[guitardude] Thursday, May 07, 2009 1:50:18 PM 
Yes, the guitar feels amazing. I knew I would love the neck. I briefly had a Import model back in 05 (Fusion HH) . It showed me what these CR necks are all about.
Plus this is the first guitar I have ever had that has the Ebony fingerboard. I prefer the look of the maple fboards, the Ebony sounds great , takes a light touch to ring out the sustain. The EMG`s are stock on the DK-1 like SDB mentioned, atleast on current models. They do have a Soloist model that had Duncans as stock.
I really do love the guitar though, best I have ever owned. And your`s??
  [Show/Hide Quoted Message] (Quoting Message by K2M from Wednesday, May 06, 2009 3:36:11 PM)
[SDBinNY] Wednesday, May 06, 2009 7:24:21 PM 
The 81/85 pair is standard on the DK 1.
  [Show/Hide Quoted Message] (Quoting Message by K2M from Wednesday, May 06, 2009 3:36:11 PM)
[K2M] Wednesday, May 06, 2009 3:36:11 PM 
Doesnt the Jackson Feel Great. I love mine. It was time to step up. Very well madeIt is Linear I can shift with eyes closed.
And the notes are perfect, relative to each other. THe contrast between mode shifts, dramatic. It is as smooth as silk. I love Her.    Do you have the 81, 85. combo.
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Tuesday, May 05, 2009 1:27:45 PM)
[Head banger] Wednesday, May 06, 2009 3:11:28 PM 
screw the concience, if they make a grand profit from you they will sleep fine, if the price you pay is lower, you should sleep beter.
  [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Wednesday, May 06, 2009 1:06:52 PM)
[Bazookajoe_666] Wednesday, May 06, 2009 1:06:52 PM 
I don't like negotiating haha. I've got too good of a conscience and don't like doing stuff like that haha.
  [Show/Hide Quoted Message] (Quoting Message by guitardude from Tuesday, May 05, 2009 1:25:12 PM)
[SDBinNY] Tuesday, May 05, 2009 3:20:39 PM 
2800 may be the MSRP, but any GOOD dealer will work from MAP. Most KV2's retail around 1,899 give or take a few bills, but doing better than 2800 should not be difficult at all..
  [Show/Hide Quoted Message] (Quoting Message by Bazooka Joe from Tuesday, May 05, 2009 11:19:10 AM)
[guitardude] Tuesday, May 05, 2009 1:27:45 PM 
K2M
 Thanks, I love it!! Am having abit of a time adjusting to the EMG`s, they do sound great, but seem to lack some top end, I`m experimenting with some things to try and solve that issue.
  [Show/Hide Quoted Message] (Quoting Message by K2M from Monday, May 04, 2009 7:08:39 PM)
<< Previous Message 401 to 500
Messages per page: 20 50 [100]
Message display order: [Newest first] Oldest first 
Page: 1 2 3 4 [5] 6 7 8 9
Next >>